Ruijie RG-S2928G-E - Page 6

Weight
Less than 3.5 kg
RG-S2928G-E switch is a class A product. In a domestic environment, this product may cause radio interference in
which case the user may be required to take adequate measures.
Product Appearance
The front panel of the RG-S2928G-E full gigabit Ethernet switch provides one Type-A USB2.0 interface, one RJ45
console port, 24 RJ45 10/100/1000Base-T Ethernet adaptive ports and four SFP ports. Figure 1-1 shows the appearance
of the RG-S2928G-E.
Figure 1-1 Appearance of the RG-S2928G-E
Front Panel
Figure 1-2 Front Panel of the RG-S2928G-E
Note:
1. USB2.0 port
2. RJ45 console port
3. RJ45 10/100/1000Base-T adaptive Ethernet
port
4. 100Base-FX/1000Base-X SFP port
5. 100Base-FX/1000Base-X SFP/2.5 G stack port
6. Switch system status indicator
7. 10/100/1000Base-T adaptive Ethernet port indicator
8. 100Base-FX/1000Base-X SFP/2.5 G stack port
indicator
Only the four SFP ports of the RG-S2928G-E V2.00 and later support 100Base-FX.