Ruijie RG-S6150-X Series - Page 13

Release Notes Upgrade Instructions (12.x)
9
8 Upgrade Instructions (12.x)
To upgrade or downgrade the device to this version, the following upgrade files are required.
Applicable Product
Upgrade File
RG-S6150-24VS8CQ-X
RG-S6150-48VS8CQ-X
Upgrade File
S6150-X_RGOS12.6(2)B1302_09192208_install.bin
File Description
Installation Package
File Size
182661510 Bytes
MD5
cc3be9e4595882311bb539952277b800
8.1 Upgrade under the Main Program
Run the CLI command on the PC configured with IP address x.x.x.x (The following
bin file name is just an example.)
Ruijie#
upgrade download oob_tftp://x.x.x.x/ S6150-X_RGOS12.6(2)B1302_09192208_install.bin
*May 14 10:32:20: %UPGRADE-6-INFO: Copy to /data/upgrade_rep/
*May 14 10:32:20: %UPGRADE-6-INFO: Please wait for a moment......
Press Ctrl+C to quit
!!!!!!!!!!!!!!!!!!!!!!!!!!!...
< The terminal is locked by upgrade module >
Upgrade start
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!10%
< you can press Ctrl+C to unlock terminal >
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!20%
< you can press Ctrl+C to unlock terminal >
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!30%
< you can press Ctrl+C to unlock terminal >
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!40%
< you can press Ctrl+C to unlock terminal >
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!50%
< you can press Ctrl+C to unlock terminal >
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!60%
< you can press Ctrl+C to unlock terminal >
!!!!!!!!100%
Upgrade success

when you see the prompt “Upgrade finish”, the copy operation
is complete (The BIN file takes effect only after the device is restarted).
< The terminal is unlocked by upgrade module >
[Slot 0]
Device type : s57x
Status : success
Ruijie>