Release Notes Upgrade Instructions (12.x)
13
Flash: SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB,
total 32 MiB
SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB, total 32
MiB
32 MiBMMC: Only Support 3.3 voltage
sdhci@30400000: 0
Loading Environment from SPI Flash... OK
Boot: Master
Net: eth0: ethernet@33410000
Press Ctrl+B to enter Boot Menu, Press Ctrl+C to enter Rboot 0
14 bytes read in 2 ms (6.8 KiB/s)
33 bytes read in 2 ms (15.6 KiB/s)
6814976 bytes read in 150 ms (43.3 MiB/s)
8422045 bytes read in 184 ms (43.7 MiB/s)
36561 bytes read in 3 ms (11.6 MiB/s)
starting pid 1179, tty '': '-/etc/sysinit'
starting initrd
Switching rootfs
[ 4.258085] TIPC: Activated (version 2.0.0)
[ 4.258546] TIPC: Started in single node mode
log: connected to ubus
Press RETURN to get started
Run the “show version” command to confirm the upgrade success:
Ruijie#show version detail
System description : Ruijie Full 25G Routing Switch(S6150-48VS8CQ-X) By
Ruijie Networks
System start time : 2022-07-25 01:41:09
System uptime : 0:00:12:27
System hardware version : 1.00
System software version : S6150-X_RGOS 12.6(2)B1302, Release(09192208)
System patch number : NA
System software number : M08385007222022
System serial number : G1RW21P000551
System boot version : 1.4.42(Master) 1.4.42(Slave)
System rboot version : 1.1.38
System core version : 4.19.1
Module information:
Slot 1/0 : S6150-48VS8CQ-X
System uptime : 0:00:12:17
Hardware version : 1.00
Boot version : 1.4.42(Master) 1.4.42(Slave)
Rboot version : 1.1.38
Software version : S6150-X_RGOS 12.6(2)B1302, Release(09192208)
Software number : M08385007222022