Rukket Batting Tee User Manual

STEP 1: Line up the holes in the red pipe with the holes
in the base’s silver collar and insert.
STEP 2: Starting at the bolt groove in the base,
run the pin through the holes, threaded end
first, and screw it down tight.
A large screw driver and hex key can be
used to adjust the silver pipe and fiberglass
pole tension.
WARNING: Don't leave your tee out in the rain. You can oil the moving parts if it becomes difficult to adjust.
RUKKET BATTING TEE
ASSEMBLY INSTRUCTIONS
QUESTIONS? GIVE US A CALL! (1-855)-478-5538
PAGE 1
V1
RukketSports
Our video instructions provide the best guidance for setting up your Rukket Batting Tee. They can be viewed online at

Rukket Batting Tee Specifications

General

Sport	Baseball, Softball
Color	Black, Red
Material	Rubber
Portability	Portable
Warranty	Lifetime Warranty

Summary

Rukket Batting Tee Assembly Instructions

Video Guidance and Support Information

Watch video instructions online for setup. Call for questions or concerns.

Step 1: Connecting the Pipe to the Base

Line up the holes in the red pipe with the holes in the base's silver collar and insert.

Step 2: Securing the Base Pin

Run the pin through the base groove, screw it tight, and adjust pole tension with tools.

Important Usage Warning

Do not leave the tee out in the rain. Oil moving parts if adjustment becomes difficult.

Customer Service Contact

Contact Rukket Sports at 1-855-4RUKKET for any questions or concerns.