Rukket SPDR User Manual

V1
Please call us if you have any questions or concerns at 1-855-4RUKKET
Please read our product safety warnings before setup
Our video instructions provide the best guidance for setting up your SPDR Net.
They can be viewed online at
SPDR NET
ASSEMBLY INSTRUCTIONS
1. Unfold the frame’s middle
cross beam. The frame will lay
at on a rubber base.
2. Unfold the legs, making
sure that the locking button
is fully extended.
3. Bring up the left arm. Lock it
into place using the base pin.
Make sure the pin is fully
inserted into the base.
4. On the left arm, fully
extended the berglass top half
of the arm. Lock into place with
the cotter pin.
5. Bring up the right arm, but
do not extend it all the way up.
Rest the base pin on the groove
that is half way up the bottom
base plate.
6. Fully extend the berglass top
half of the left pole. The arms
should be slanted in the same
direction, as shown above.
1
2
3
4
5
6

Rukket SPDR Specifications

General

Product Name	Rukket SPDR
Category	Sports & Outdoors
Sport	Baseball, Softball
Age Range	All Ages
Skill Level	All Skill Levels
Portable	Yes
Weight	15 pounds

Summary

SPDR Net Assembly Instructions

Step 1: Unfold Frame

Unfold the frame's middle cross beam until it lies flat on a rubber base.

Step 2: Unfold Legs

Unfold the legs and ensure the locking button is fully extended.

Step 3: Attach Left Arm to Base

Bring up the left arm and lock it into the base pin, ensuring the pin is fully inserted.

Step 4: Secure Left Arm Pin

Fully extend the fiberglass top half of the left arm and secure it with the cotter pin.

Step 5: Attach Right Arm to Groove

Bring up the right arm, rest the base pin on the groove halfway up the bottom base plate.

Step 6: Extend Top Pole

Fully extend the fiberglass top half of the left pole; arms should slant in the same direction.