Included equipment:
A. Front base with pads
B. 2 front supports
C. Pivot joint (left and right) with cotter pin
D. Top cross bar
E. Rear base with pads
F. Rear telescoping supports (left and right)
G. Rear cross support
H. Carriage
bolts (x12), Metal Washers (x12),
Plastic Washers (x2), Nuts (x12), and
assembly tool
I. Bungies (x40)
J. Net
/ RukketSports
Questions? Give us a call! (1-855)-478-5538
Our video instructions provide the best guidance for
setting up your rebounder. It can be viewed online at
Please call us if you have any questions or concerns at 1-855-4RUKKET
Please read our product safety warnings on page 2 before setup.
Page 1
To Next Page
Need help?
General
