EasyManua.ls Logo

Rukket SPDR NET - Position Net on Frame; Slide Red Sleeves and Secure; Upright Left Arm and Lock; Attach Velcro Straps to Legs

Rukket SPDR NET
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
8
9
10
7. Lay the net in front of the
frame, logos facing downward.
8. Slide the red sleeves
Use ties to attach the bases of the
red sleeves through the holes on the
9. Pull the left arm fully upright
and make sure that the base pin
is fully inserted into the slot.
10. Attach the velcro straps to
the ends of the folding legs.
11
11. Attach the wings using the
provided bungies. The top and side
edges of the wings are red, and the
bottom edge is black. The edge of
the wings should be attached a few
squares inside the main net’s edge.
12. The bag at the end of the
wing can be used as a
weigh-down, or it can be staked
by small loops at the corner.
12
OR
Ready to play!
V1

Related product manuals