MODEL 51240B/53540B/53640B/61240B/63540B/63640B
39
rinse second value;
4. Press and finish adjustment, press to turn
back.
1. In fast rinse time display status, it shows and
5-10:00. Press and enter into program set mode.
and 10 flash；
2. Press or to adjust the fast rinse minute time；
3. Press , 00 flash. Press or to adjust the fast
rinse second value;
4. Press and hear a sound “Di”, then finish
adjustment, press to turn back.
1. In brine refill time display status, it shows and
6-05:00, Press and enter into program set mode.
and 05 flash；
2. Press or to adjust the brine refill minute time；
3. Press , 00 flash. Press or to adjust the brine
refill second value;
4. Press and hear a sound “Di”, then finish
adjustment, press to turn back.
Maxim
um
Interval
Regen
eration
Days
1. In maximum Interval regeneration days display status,
it shows H-30. Press and enter into program set
mode. and 30 flash；
2. Press or to adjust the Interval regeneration
days；
3. Press and hear a sound “Di”, then finish
adjustment, press to turn back.
For example，the fast rinse time of a softener is 12 minutes. After
regenerating, the chloridion in the outlet water is always higher than normal,
indicating that there is no enough time for fast rinse. If you want the time to
set to 15 minutes, the modification steps as follows:
To Next Page
Loading...
