MODEL: 63518-N77A1 /63618-N77A3/ 53518-N77B1
18
please pay attention to whether the time is current or not. If the time is
not right, you can adjust as follow: After lifting the lock status, press ,
the and light on. Then press , the and hour value flashes.
Press or continuously, reset the hour value; Press again,
and minute value flash. Press or continuously, reset the minute
value; Press and hear a sound “Di”, then finish the adjustment.
Press exit and turn back the service status.
The regeneration parameters have been set when control valve left
factory. Generally, it does not need to reset. If you want enquiry and
modify the setting, you can refer to the professional application
specification.
To Next Page
Loading...
Need help?
General
