Runxin 63518 - Page 37

MODEL: 63518-N77A1 /63618-N77A3/ 53518-N77B1
34
Water
Treat
ment
Capac
ity
1. In water treatment capacity display status, it
shows and 80.00. Press and enter into
program set mode. and 80.00 flash；
2. Press or to adjust the water treatment
capacity value（m
3
）；
3. Press and hear a sound “Di”, then finish
adjustment, press to turn back.
Resin
Volum
e
1. In resin volume display status, it shows 100 L.
Press and enters into program set mode.
and 50 value flash；
2. Press or to adjust the volume
value(L)；
3. Press and hear a sound “Di”, then finish
adjustment, press to turn back.
Feed
Water
Hardn
ess
1. In feed water hardness display status, it shows
yd1.2. Press and enter into program set
mode. and 1.2 value flash；
2. Press or to adjust the volume
value(mmol/L)；
3. Press and hear a sound “Di”, then finish
adjustment, press to turn back.
Excha
nge
Factor
1. In exchange factor display status, it shows
AL.55. Press and enter into program set
mode. and 55 flash；
2. Press or to adjust the exchange factor
value；
3. Press and hear a sound “Di”, then finish
adjustment, press to turn back.