Runxin 63604 User Manual

MODEL 63504-F63C1/63604-F63C3/73504-F68C1/73604-F68C3
39
adjustment, press to turn back.
Interval
Backwash
Times
1. In Interval backwash time display status, it
shows F-00. Press and enter into program
set mode. and 00 value flash；
2. Press or to adjust the interval backwash
times value；
3. Press and hear a sound “Di”, then finish
adjustment, press to turn back.
Water
Treatment
Capacity
1. In water treatment capacity display status, it
shows and 10.00. Press and enter into
program set mode. and 10.00 flash
2. Press or to adjust the water treatment
capacity value（m
3
）；
3. Press and hear a sound “Di”, then finish
adjustment, press to turn back.
Resin
Volume
1. In resin volume display status, it shows 50L.
Press and enters into program set mode.
and 50 value flash；
2. Press or to adjust the volume value(L)；
3. Press and hear a sound “Di”, then finish
adjustment, press to turn back.
Feed Water
Hardness
1. In feed water hardness display status, it shows
yd1.2. Press and enter into program set
mode. and 1.2 value flash；
2. Press or to adjust the hardness value
（mmol/L）；
3. Press and hear a sound “Di”, then finish
adjustment, press to turn back.
Exchange
Factor
1. In exchange factor display status, it shows
AL.55. Press and enter into program set
mode. and 55 flash；

Runxin 63604 Specifications

General

Brand	Runxin
Model	63604
Category	Control Unit
Language	English