Runxin F79A-LCD - 2.2. Basic Setting & Usage; A. Parameter specification

MODEL 82602-F79A-LCD/82602B-F79B-LCD/82604-F82A-LCD/82604B-F82B-LCD
14
2.2. Basic Setting & Usage
A. Parameter specification
Function
Factory
Default
Parameter
Set Range
Instruction
Time of
Day
Rando
m
00:00～23:59
Control
Model
A-01
A-01
Down-flow regenerate on the day
although the available volume of
treated water drops to zero (0).
Regeneration starts at the
regeneration time.
A-02
Down-flow regenerate immediately
when the available volume of treated
water drops to zero (0).
A-03
Down-flow regeneration,
regeneration starts at the
regeneration time of the current day
when the available volume of treated
water less than the average water
consumption of last 7 days.
A-11
Up-flow regeneration, regeneration
starts at the regeneration time
although the available volume of
treated water drops to zero (0).
A-12
Up-flow regeneration immediate,
regenerate when the volume of
treated water drops to zero (0).
A-13
Up-flow regeneration, regeneration
starts at the regeneration time of the
current day when the available
volume of treated water less than the
average water consumption of the
last 7 days.
A-21
Filter Type, filter when the service
days reach to zero (0) and the current
time is matched with filter setting