How to fix water pressure loss in Runxin RL-R150 Water Dispenser?
If your Runxin Water Dispenser is experiencing water pressure loss, it could be due to the filter needing a backwash. Perform a backwash of the filter. Also, check the pipework for any blockages and clear them if necessary.
Why is my Runxin RL-R150 Water Dispenser filter passing raw water?
If your Runxin Water Dispenser's filter is passing raw water, it could be due to several reasons. First, check if the bypass valve is open and close it. Second, inspect the riser pipe for any cracks and ensure the O-ring is in good condition. Lastly, an internal valve leak could be the culprit, so check or replace the valve body.
General| Brand | Runxin |
|---|---|
| Model | RL-R150 |
| Category | Water Dispenser |
| Language | English |
System automatically regenerates and allows setting raw water hardness for optimal performance.
Covers parameter memory, language selection, button lock, and meter delayed regeneration.
Explains the automatic sequence: softening, backwash, brine & slow rinse, brine refill, and fast rinse.
Guide to operating the control panel, including button functions and interface navigation.
Procedure for setting the current time of day on the control panel.
Procedure for setting the desired regeneration time for the softener.
Procedure for adjusting the water hardness parameter on the control panel.
Enters user mode after power on, displaying system status and information.
Illustrates different service and status displays for the softener valve.
Steps for initial setup, filling brine tank, and conducting trial running procedures.
Details the backwash stage, including valve operation and duration for cleaning resin.
Explains brine absorption and slow rinse for resin regeneration and softening capacity recovery.
Describes the process of refilling the brine tank with water for the next regeneration cycle.
Details the fast rinse stage to discharge residual brine and compact resin particles.
Covers returning to service status, checking for leaks, and final qualification of outlet water.
Advises on handling spare parts, professional installation, and avoiding heat sources or freezing.
Recommends pretreatment if raw water quality does not meet standards.
Guidance on checking brine levels, salt level relative to water, and salt dissolving time.
Specifies salt purity requirements, operating temperature, pressure, and sodium intake considerations.
Provides advice on long-term idle periods, preventing water hammer, adjusting regeneration, and salt bridge formation.
Details the one-year warranty period and conditions for free maintenance due to product defects.
Explains availability of after-sales service, maintenance, and parts replacement after warranty expiry.
To Next Page
