855.969.2453 www.rushbikes.com Rev. A
Notes: While 3M states the promoter and tape combination will not harm painted surfaces, we do not recommend using the
promoter on new paint jobs that are not fully cured or aren’t at least six months old.
If you need to remove a light strip once placed, you can do so using a hair dryer/heat gun and carefully pulling the light strip off. We
recommend using a hard plastic card or similar object (e.g., old credit card) to help pry the light strip off the surface to which it was
mounted. If you must remove the light strip for any reason, the 3M tape on the back of the light strip will not be reusable.
Clean up: 3M Promoter can be removed with isopropyl alcohol. Vigorous scrubbing may be required.
The 3M adhesive tape on the back of our LED strips is one-use only. If you apply them to a surface that has not been properly
prepared, the holding power of the 3M adhesive tape will be greatly diminished perhaps making the light strip unusable. If you take
the time to properly prepare the surface in accordance with our instructions here, you won't have any problems mounting your
LEDs.
WARRANTY INFORMATION
The Rush Lights original-owner warranty is only available to customers who purchase genuine Rush Lights products from
www.rushbikes.com, ordering over the phone, or by purchasing in person at the shop. This warranty is null and void in the absence
of an original sales receipt from one of the purchasing options.
This warranty is a product-only warranty and does not cover reimbursement for labor or any other charges you may incur having
a defective product replaced.
RMA Authorization Required for Defective Returns
Defective product must be returned for inspection and warranty approval prior to replacement. Product that is physically damaged
is not eligible for replacement under warranty. All returns must clearly display an RMA authorization number on the outside of the
package. An RMA number will be issued by requesting an RMA number via email OR by calling our office at 855-969-2453. If calling
our office, please be sure to have your order number handy which will be printed on your receipt. Any shipment received at our
offices without an RMA authorization number clearly listed on the package will be refused and returned to sender.
To Next Page
Loading...