Russell Hobbs 28270

9
RICE
1. Plug in the appliance. The main control display will ash “----”. This indicates that the heat is o and the appliance is ready
to be programmed.
2. Add the rice according to the table and t the glass lid.
3. Press the Rice button. The display will show “----”.
4. Press the I/O button. The unit will beep once. The display will cycle through dashes. (- . . . ), (. - . .), (. . - .), (. . . -). This will
continue to run through the entire cooking cycle. Keep the lid closed throughout the cooking cycle to ensure that the
rices is cooked correctly.
5. The rice is cooked when the temperature reaches approx. 105°C, the liquid in the pot has been absorbed by the rice, and
the excess has boiled o.
• When cooking has ended, the unit will automatically switch to the keep warm setting. The display will ash and start
counting up from zero (00:00) to 4 hours (04:00).
• After the keep warm setting has been on for 4 hours, the unit will stop heating and return to the default display: “----”.
• Note: Do not keep foods on the keep warm setting for more than 4 hours.
• Unplug the appliance when not in use and always allow it to completely cool before cleaning and storing.
6. When nished, press the I/O button.
7. Unplug the appliance when not in use and always allow it to completely cool before cleaning and storing.
Tip
• Allow rice to rest on the keep warm settings for at least 15 minutes before serving.
Rice Cooking Chart
Rice (grams) Water (ml) Approx. number of servings
FOR WHITE RICE
200 480 2-4
300 720 3-5
400 960 4-5
600 1440 8-10
FOR BROWN RICE
200 520 2-4
300 840 3-5
400 116 0 4-6
600 1800 8-10
• For other types of rice not listed in the cooking chart or when in doubt, follow the package directions.
BOIL
1. Add water and ingredients and t the glass lid.
2. Plug in the appliance. The main control display will ash “----”. This indicates that the heat is o and the appliance is ready
to be programmed.
3. Press the Boil button.
4. The default cooking time is 30 minutes. To adjust the cooking time, use the u and d buttons. The maximum cooking
time is 2 hours.
5. Press the I/O button. The display will stop ashing and the cooking pot will start to heat up.
6. When the temperature of the unit reaches 100°C, it will beep twice and the time will begin to count down.
7. When the cooking time has ended, the unit will stop heating and return to the default display: “----”.
• IMPORTANT: If you are making pasta, make sure that the water is boiling before adding the pasta.