11
Open position Closed position
1.The lid will not switch on without securely closing it as per above “closed position’’ image
and sliding the rapid release and lock up to the lock position.
2. When all pressure has been released from the unit, open the lid by rotating the handle
counter clockwise and lift the lid using the handle.
WARNING: Food contents in the pressure cooker are hot. Always open the lid away from
face and body.
NOTE: The Sauté function will not need the lid on to cook.
Pressure release
1.Ensure the the rapid release is at the lock position to start cooking process. If it is not in
lock position, the display panel will read ‘’LID’’ which indicates you need to adjust it
accordingly for pressure cooker to start cooking cycle.
2.To safely release the pressure, select "KEEP WARM/CANCEL" mode. Slide down the
rapid release and lock switch to the middle position (steam icon) on pressure cooker lid.
Allow all pressure to escape from pressure cooker.
To Next Page
Loading...
