For Customer Services & Spare Parts please call 0345 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm
or visit us at www.productcareuk.com
16
Child Lock
Child lock is used in order to protect the washing cycle from the effects of unwanted button
activations during the cycle. The Child lock is activated by pressing the first and third button
on the control panel at the same for more than 3 seconds. When child lock is activated
LEDs on the cold wash and no spin buttons will blink to indicate that Child Lock is active. In
order to De-activate Child Lock, the same buttons (1st and 3rd) should be pressed again for
more than 3 seconds. Deactivation of Child Lock is shown by blinking of the LED on the cold
wash and no spin buttonsbutton. Whilst the child lock is active all operations become inactive
except for the dial number ‘’0’’ which stops the cycle however, if the dial is returned to the
current setting number and started the programme will continue as normal.
Running the machine
Program selection and features
Select an appropriate programme for your clothing by turning the main knob.
Start/Pause
By pressing this button, you can start the programme you have selected or pause a running
programme.
Starting the programme
• Adjust the programme knob to the programme you desire.
• The programme ready light will be on.
• If you want, you can select one or more additional functions.
• Run the programme which you have selected by pressing the Start/Pause button.
Changing the programme
If you have selected a programme and you want to continue with another:
• Press the Start/Pause button.
• Bring the program knob to the O (off) position.
• Adjust the programme knob to the programme you desire.
• The programme ready light will be on.
• By pressing the Start/Pause button, run the programme which you have selected.
Cancellation of the Programme
To end a programme early:
• Press the Start/Pause button.
• Turn the programme knob to O (off) position.
• Turn the programme knob to “Draining” or “Spinning” programme.
• The programme ready light will be on.
• Run the programme you have selected by pressing the start/pause button.
End of programme
Your machine will automatically stop when the programme you have selected ends.
• The programme end light will be on.
How to Use
To Next Page
Loading...
