Installing and Switching on Your Appliance
• Operating voltage for your appliance is 220-240V at 50Hz.
• If you need help or are unsure how to install the unit, please contact Customer
Services on 0345 208 8750 or visit www.productcareuk.com.
• Before plugging in the power supply, ensure that the voltage on the nameplate
corresponds to the working voltage of your electrical system in your home.
• Insert the plug into an efficient Ground (Earth) connection. If the socket has no
Ground (Earth) contact or the plug does not match, we suggest you call an authorised
electrician for assistance.
• We do not take responsibility for damages that occur due to Ungrounded (Un-
earthed) usage.
• Place your appliance in an area that is not exposed to direct sunlight.
• Your appliance should be placed at least 500mm (50cms) away from stoves, ovens
and other heating cores.
• It should never be used outdoors or left in the rain.
• When your appliance is placed next to a chest freezer or freezer, there should be
at least 50 mm (5cms) between them to prevent humidity on the outer surface.
• Do not place anything on your appliance and install the unit in a suitable place so that
there is at least 300 mm (30cms) clearance above the appliance.
• If placing your appliance next to kitchen cabinets, leave 50 mm (5cms) between them.
• The rear of the appliance should be at least 50 mm (5cms) away from the back wall.
• The appliance must be used in the vertical position and on a flat surface.
• To level the appliance, use the adjustable feet on the front of the appliance.
• Do not place your appliance on a carpeted surface as this will prevent adequate
ventilation.
• Do not place hot food or containers in the appliance as this can cause damage your
appliance.
For Customer Services & Spare Parts please call 0345 208 8750
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
or visit us at www.productcareuk.com
5
To Next Page
Loading...
Need help?
General
