Installation
• The unit should be kept away from direct sunlight.
• Remove all transport tapes and foam protection pieces. Clean the
interior of the appliance with a cloth dampened in lukewarm soap and
water. Wipe with clear water and wipe dry.
• When the appliance has been positioned, adjust the two front feet to
ensure the unit is stable. This is essential to ensure quiet running and
proper door opening /closing. See figure below.
• Plug in the wine cooler and adjust the temperature to the required level
by the temperature adjustment buttons. Close the door.
• Leave the appliance for a minimum of 3 hours for the correct
temperature to be reached before placing bottles inside.
For Customer Services & Spare Parts please call 0345 208 8750
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
or visit us at www.productcareuk.com
8
To Next Page
Loading...
Need help?
General
