16
Meat Setting
Normal Cooking:
In standby mode, press the “Menu” button.
The “ ” indicator light will turn on.
The LED display will flash “P01”.
10 (ten) seconds later if no button is pressed, the appliance will automatically start
cooking using the “Meat” setting/ mode.
The LED display will show “P01” and start to countdown when pressure rises in the
cooker.
Preset Cooking:
In standby mode, press the “Menu” button.
The “ ” indicator light will turn on.
The LED display will flash “P01”.
Press the “Delay Timer” button. The “Delay Timer” indicator will begin to flash. The LED
display will flash the amount of preset time.
Adjust the amount of preset time by pressing the “+''/“-” buttons. Each adjustment will
adjust the amount of preset time by 10 (ten) minutes.
10 (ten) seconds after setting the preset time, the appliance will automatically start preset
cooking using the “Meat” setting. The LED display will show the cooking cycle finishing
time and start to countdown.
To Exit the Cooking Cycle/ Mode:
Press the “Keep Warm” button to exit the current cooking cycle/ mode.
CAUTION: It is not recommended to use the Preset function to cook foods which may spoil
quickly. Leaving raw foods inside the pressure cooker for long periods of time prior to cooking
may result in the food spoiling. Cook food that can be left out such as rice, beans, grains or other
similar foods which will not spoil easily.
To Next Page
Loading...
