Russell Hobbs RHEP7

20
Sauté Setting
Normal Cooking:
 In standby mode, press the “Menu” button.
 The “ ” indicator light will turn on.
 The LED display will flash “P01”.
 Now press the “+” button 4 (four) times until you reach the “Sauté” menu setting.
 The LED display will show “P05”.
 10s later if no button is pressed,
 The appliance will automatically start cooking using the “Sauté” setting.
 The LED display will show and countdown from “0:30”.
To Exit the Cooking Cycle/ Mode:
 Press the “Keep Warm” button to exit the current cooking cycle/ mode.
Slow Cook Setting
Normal Cooking:
 In standby mode, press the “Menu” button.
 The “ ” indicator light will turn on.
 The LED display will flash “P01”.
 Now press the “+” button 5 (five) times until you reach the “Slow Cook” menu setting.
 The LED display will show “P06”.
 10 (ten) seconds later if no button is pressed, the appliance will automatically start
cooking using the “Slow Cook” setting/ mode.
 The appliance will automatically start cooking using the “Slow Cook” setting.
 The LED display will show and countdown from “8:00”.
To Exit the Cooking Cycle/ Mode:
 Press the “Keep Warm” button to exit the current cooking cycle/ mode.