Russell Hobbs RHEP7

34
LED display shows E2
LED display shows C1
LED display shows E8
Bottom sensor fault.
High temperature since
there isn't water in the
inner pot.
Pressure switch fault.
Send to the service center
for repair.
Add water according to
the requirement. Put the
inner pot correctly.
Send to the service center
for repair
9
Rice is half cooked or too
hard.
Too little water.
Lid opened prematurely.
Add water accordingly.
After the cooking cycle
completes, leave the lid
on for 5 more minutes.
10
Rice is too soft.
Too much water.
Reduce water
accordingly.
SERVICING THE APPLIANCE
There are no user serviceable parts in this appliance. If the unit is not operating correctly, please
check the following:
 You have followed the instructions correctly
 That the unit has been wired correctly and that the wall socket is switched on.
 That the mains power supply is ON.
 That the plug is firmly in the mains socket.
If the appliance still does not work after checking the above:
- Consult the retailer for possible repair or replacement. If the retailer fails to resolve the problem
and you need to return the appliance, make sure that:
 The unit is packed carefully back into its original packaging.
 Proof of purchase is attached.