Russell Hobbs RHF208

8
Cleaning the vacuum cleaner
44. Switch the cleaner off and unplug it before cleaning.
45. Don’t put any part of the cleaner in a dishwasher.
46. Don’t use harsh or abrasive cleaning agents or solvents.
47. Wipe external surfaces with a damp cloth. A dab of washing-up liquid will
remove stubborn stains.
48. Wipe the tools with a damp cloth or hand wash in warm soapy water.
Rinse to remove any trace of soap and air dry before using.
49. Wipe the extendable tube and hose with a damp cloth. Check they’re dry
beforeretting.Don’tputtheminwater,you’lldamagethem.
50. Wash the bin in warm soapy water with a soft cloth or sponge. Rinse to remove
all traces of soap and air dry. Don’t replace until fully dry.
Cleaning the lters
51. Make sure the space you are using is protected with an old towel or some
newspaper as this process can be messy.
52. Grip the bin lid with one hand, grip the bin with the other, and turn the lid of
the bin to move the | mark on the lid from the
around to the .
53. Liftthelidandlterassemblyoutofthebinandturnthemupsidedown.
54. Turnthelterassemblyclockwisetounlockitandliftitofftoexposethe
HEPAlter.
55. LifttheHEPAlterupandoutofthelid.
HEPA
filter
filter
assembly
mark
mesh filter
The mesh lter
56. Washthelterassembly(containsmeshlter)inwarmsoapywater.
57. Leave it to air dry – do NOTretituntilit’scompletely dry.
The HEPA lter
58. Thislterisresponsibleforcleaningthereturnairandrequires
careful handling.