To Next PageTo Next Page
Need help?Do you have a question about the Russound CA6.4 and is the answer not in the manual?
General| Number of Zones | 6 |
|---|---|
| Input Sources | 4 |
| Audio Formats Supported | Stereo |
| Frequency Response | 20 Hz - 20 kHz |
| Input Impedance | 10 k ohms |
| Control Options | IR, RS-232, Ethernet |
| Impedance | 8 ohms |
| Output Impedance | 8 ohms |
Detailed safety guidelines, warnings, and precautions for operating the appliance safely.
Important precautions regarding power, handling, location, and care of the CA6.4 unit.
Guidance on connecting various audio sources like Tuner, CD, Tape, and AUX to the unit.
Instructions for connecting speakers to each zone output, including polarity and wire gauge recommendations.
Description of the 12V trigger output for activating accessories and its connection.
Steps for connecting IR emitters to control source equipment remotely via keypads.
Details on connecting two CA6.4 units using the IR Link for signal pass-through.
Instructions for wiring keypads to the correct zone inputs on the controller unit.
Steps for mounting and wiring the standard CA KP keypads in the chosen location.
Wiring instructions for connecting CA-LCD keypads, including SRM-2.1 module connections.
Guidance on selecting a location and mounting the CA-LCD keypad, considering sunlight and wiring.
How to adjust backlight brightness, volume, and balance settings before final installation.
How to power on the CA6.4, understand zone indicators, and access functions via keypads.
Using the control knob for power, volume, and source selection on the CA KP keypad.
Using the LCD display, buttons for source, store, volume, power, and lamp on the CA-LCD keypad.
