Need help?Do you have a question about the Russound A-C68 and is the answer not in the manual?
General| Brand | Russound |
|---|---|
| Model | A-C68 |
| Category | Controller |
| Language | English |
Key safety measures and guidelines to follow before operating the appliance.
Factors to consider before installing the Russound A-C68 system for optimal setup.
Recommendations for connecting power, signal cables, and wiring for reliable system operation.
Step-by-step guide for physically mounting the A-K5L keypad in a single-gang electrical box.
Configuration of status LED and setup button for installer access and operation.
Setting jumpers for OS update mode and using the update port for firmware.
Instructions for connecting the A-KSC keypad to an A-K5L and installing them in a double-gang box.
Details the location of the A-KSC port for connecting the source control keypad.
Connecting keypads to the A-C68 using RJ45 CAT-5 wiring and dip switch settings.
Configuration of dip switches on the A-C68 for different keypad types (A-K5L, A-K3, others).
Connecting up to six audio sources using RCA cables to the A-C68 controller's inputs.
Connecting IR emitters to control source equipment via the A-C68's IR output ports.
Connecting a 12VDC source to mute all A-C68 zones simultaneously.
Outputting 12VDC to trigger external amplifiers or components when zones are active.
Connecting an audio source to activate paging across all enabled A-C68 zones.
Connecting multiple A-C68 controllers using CAT-5 for status and command communication.
Passing source signals between A-C68 units for sharing audio in multi-controller systems.
Assigning source numbers and command types for IR learning and device codes.
Assigning command types and IR device codes for each source using the A-SRC1 remote.
Adding missing source control commands using the source's factory remote control.
Programming the controller for automatic numeric IR prefix/suffix commands via A-KSC keypad.
Re-entering a correct command type number after an incorrect entry during setup.
Clearing the current command type assigned to a selected source.
Choosing source names, checking version, and performing factory initialization on the A-K5L keypad.
Viewing the current firmware version installed on the A-K5L keypad.
List of IR device codes for various audio amplifier brands.
List of IR device codes for various CD player brands.
List of IR device codes for various cable converter brands.
List of IR device codes for audio amplifier and tuner brands.
List of IR device codes for various DVD player brands.
List of IR device codes for satellite receiver brands.
Continuation of IR device codes for satellite receiver brands.
List of IR device codes for various VCR brands.
List of IR device codes for various TV brands.
List of IR device codes for various video accessory brands.
To Next Page
