Need help?Do you have a question about the Russound MCA Series and is the answer not in the manual?
Internet is required for installer credentials and firmware updates for initial setup.
Enter certified installer credentials via Web Config to unlock the device from its initial locked state.
A default password prevents unauthorized changes to configuration settings.
Details RJ-45 connections for MDK-C6 and SLK-1 keypads, including zone mapping and power.
Explains connecting XTS touchscreens via Ethernet network, not keypad ports.
Describes amplified speaker outputs (zones 1-6) and line level outputs (all 8 zones) using snap connectors.
Connects up to six MCA-88 controllers using RNET Link ports and CAT-5e cables.
Sets unique IDs for multiple controllers using a rotary switch before system setup.
Details the boot process, LED states for power, network, and firmware status.
Provides guidance for common issues like zone LEDs, keypad response, and network connectivity.
Instructions for resetting the unit to factory defaults via the reset button.
To Next Page
General
