Need help?Do you have a question about the Russound MCA-C3 and is the answer not in the manual?
General| Power Output | 30 Watts per channel |
|---|---|
| Channels | 3 |
| Impedance | 4-8 Ohms |
| Audio Zones | 3 |
| Control | RS-232, IR, Ethernet |
| IR Outputs | 3 |
| Keypad Ports | 3 |
| Frequency Response | 20 Hz - 20 kHz |
| Input Sensitivity | 200 mV |
| Input Impedance | 10 kOhms |
| Dimensions | 17" W x 3.5" H |
| Total Harmonic Distortion | < 0.05% |
Essential instructions for safe operation and maintenance of the appliance.
Precautions regarding electric shock, water exposure, and proper power source connection.
Avoid using the appliance near water or exposing it to liquids.
Read all operating and safety instructions before use and retain for future reference.
Guidelines on appliance placement, ventilation, heat sources, and power sources.
Conditions requiring professional servicing and user limitations.
Guidelines for grounding outdoor antennas to protect against static charges and voltage surges.
Highlights the MCA-C3's multiroom audio capabilities, zone control, and connectivity.
Notes the necessity of SCS-C5 configuration software for system programming.
Details components like the power switch, zone LEDs, USB port, and IR receiver window.
Explains ports for RNET, keypads, audio sources, line level outputs, and speakers.
Describes serial interface, Ethernet port, controller ID switch, and AC voltage selection.
Describes buttons, menus, and navigation for controlling music sources and system settings.
Identifies LCD screen, title bar, status box, volume indicator, and IR receiver.
How to turn zones on/off and adjust volume or mute audio using the keypad.
Navigating sources, favorites, alarm, and sleep timer options from the main menu.
Adjusting audio settings, clock, display contrast, and installer options.
Details the purpose of each button for controlling sources, devices, and system functions.
Guide to programming the remote for local sources and managing device codes.
Covers ventilation, placement, rack mounting, and connecting up to six controllers.
Details electrical power, standby power requirements, and important installation considerations.
Steps for rack mounting the unit and routing CAT-5e and speaker wiring.
Identifies components like the IR connection, update port, and programming port.
Connecting an external IR receiver to the MDK-C5 keypad and disabling the internal receiver.
Step-by-step guide for disassembling and reassembling the keypad to change color plates.
Using CAT-5e cables and RJ45 connectors to link keypads to the MCA-C3 controller.
Information on using SA-ZX3 splitter for zones requiring multiple keypads.
Instructions for connecting speakers to the MCA-C3 using modular snap connectors.
Connecting RNET-enabled sources using CAT-5e cables for data and IR signals.
Connecting audio sources via RCA cables and configuring the internal AM/FM tuner.
Connecting IR emitters to source components for individual zone control.
Utilizing a common IR output for system-wide control of various sources.
Connecting multiple MCA-C3 units using CAT-5e cables and RNET Link ports.
Setting unique controller IDs for multi-controller systems and firmware update mode.
Using 12VDC outputs to trigger external devices like amplifiers or power management systems.
Connecting home theater triggers for power management and shared source control.
Utilizing the 12VDC trigger input to initiate paging events from external systems.
Connecting audio sources for paging, interrupting audio for announcements.
Connecting via RS232 for automation systems and USB for PC programming.
Connecting to the local network via Ethernet for programming and control.
Details programmable options including source configuration, naming, exclusion, and power management.
Step-by-step guide to connecting, powering, and configuring the system for initial operation.
Basic troubleshooting tips for common startup problems such as LED indicators and keypad responsiveness.
Instructions for programming the remote to control various audio/video devices using their codes.
Methods for finding device codes and verifying assigned codes.
How to use the learning feature to add functions from other remotes.
Options for managing volume control across different devices or zones.
Lists device codes for audio amplifiers and amp/tuners from various manufacturers.
Device codes for programming the remote to control video accessories and CD players.
List of device codes for programming the remote to control satellite receivers.
Device codes for programming the remote to control televisions and VCRs.
Detailed technical data including dimensions, power, audio performance, and connectivity.
Specifications for the keypad, including power, display, and controls.
Details the product warranty, coverage period, and common exclusions.
Instructions for returning the unit for repair, including obtaining authorization and shipping.
To Next Page
