Russound MCA-C3 - Appendix; Factory Settings Prior to Shipping

MCA-C3 Test Procedure
Page 71 of 77
Factory Settings prior to Shipping
1. Set the following controls to the following:
Controller ID switch to 1.
AC240V~ / AC100V~ switch to AC110V~
Fixed/Variable Switch to Variable.
Note: If directed set the AC240V~ / AC100V~ to the
appropriate setting for the country indicated.
Place the correct fuse in the ACA-E5 rear panel fuse
holder for the specified AC voltage marked on the rear
panel.
2. Place the MCA-C3-E5 in the Gift Box.
Appendix
Figure 1: RCK and RSS rear view with proper cable connections