Do you have a question about the Russound P75 and is the answer not in the manual?
Safeguards amplifier against thermal overload.
Safeguards amplifier against short-circuit conditions.
Describes power, speaker selection, balance, and volume controls.
Details the controls and indicators on the front of the amplifier.
Details the input/output connections and switches on the rear.
Safeguards amplifier against thermal overload.
Safeguards amplifier against short-circuit conditions.
Describes power, speaker selection, balance, and volume controls.
Details the controls and indicators on the front of the amplifier.
Details the input/output connections and switches on the rear.
| Power Output | 75 Watts per channel |
|---|---|
| Channels | 2 |
| Input Sensitivity | 1.0 V |
| Input Impedance | 47k Ohms |
| Gain | 32 dB |
| Power Requirements | 120V AC, 60Hz |
| Weight | 15 lbs |
| Damping Factor | > 100 |
| Frequency Response | 20Hz - 20kHz (±0.5dB) |
| Protection | Short circuit, thermal |