Need help?Do you have a question about the Russound R1250MC and is the answer not in the manual?
General| Channels | 12 |
|---|---|
| RMS Power per Channel @ 8 Ohms | 50W |
| RMS Power per Channel @ 4 Ohms | 75W |
| Bridged RMS Power @ 8 Ohms | 150W |
| Total Harmonic Distortion (THD) | <0.1% |
| Gain | 32dB |
| Zone Outputs | 6 |
| Trigger Input | 12V DC |
| Frequency Response | 20Hz - 20kHz |
Lists numbered safety precautions for operating the appliance, covering water, cleaning, ventilation, heat, grounding, power cords, etc.
Introduces the R1250MC as a 12-channel amplifier for home theater and distributed audio, highlighting features like bridge mode and zone triggering.
Describes the front panel of the R1250MC amplifier, focusing on Zone Indicator LEDs.
Explains how to rack mount the R1250MC amplifier using included hardware, noting its 3-rack space requirement.
Details bus input/output, line input, speaker outputs, and 12VDC trigger in/out connections for zone audio and control.
Explains the Line/Bus Switch for input selection and the Stereo/Bridge Mono Switch for operational mode.
Covers gain controls for sound level adjustment, power switch function, and delay time settings for standby.
Details the AC input, fuse receptacle, and AC voltage requirements for the amplifier.
Explains how to combine channels for higher power mono output in bridged mode and connection details.
Details the amplifier's thermal protection circuitry and actions to take if it engages due to overload or ventilation.
Describes the protection circuitry for short circuits and how the front panel LED indicates this condition.
Outlines how the R1250MC can be configured for audio distribution or home theater systems, including bridging zones.
Lists detailed technical specifications for the R1250MC amplifier, including output power, frequency response, dimensions, and weight.
Provides details about the R1250MC amplifier's two-year warranty, terms, conditions, and return process.
To Next Page
