To Next Page

To Previous Page

DE FINOSEENG

Turn on

• After pressing the “ON/STANDBY” button, the induction cooker is ready for heating.

Press the “Function” button, the induction cooker enters heating mode.

• After pressing the “ON/STANDBY” button, if no function button is pressed for 10 seconds,

the induction cooker will switch o automatically.

• After pressing the function button, if there is no proper pot on the ceramic plate, the

induction cooker will not heat up and the alarm will sound to indicate that a pot is

required. One minute later, it will switch o automatically.

Function

• After switching on the induction cooker, press “Function” button to enter the

temperature or level mode.

• You can adjust the power level by pressing “+” or “-” button (200, 400, 600, 800, 1000,

1200, 1400, 1600, 1800 & 2000W).

You can adjust the temperature by pressing “+” or “-” button (60, 80, 100, 120, 140,

160, 170, 180, 190 & 200 °C).

Timer

• Press the “Timer” button to enter the timer mode. When the timer indicator lights

up and the numbers blink on the display, press the “+” or “-” button to adjust the

time duration. Adjustable timer from 1 minute to 3 hours.

• When the adjustment is ﬁnished, the number on the display will be shown after

blinking for several seconds. The induction cooker starts counting down.

• When the counting down is over, the induction cooker automatically stops heating

and switches o.

• The induction cooker will shut down when the default timer is reached unless the

user sets the timer himself.

Keep warm

• Press the “Keep warm” button to maintain warmth.Under this mode, the induction

cooker heats the ingredients with gentle power to maintain a certain temperature

inside the pot.

NOTE: Under this mode, the power cannot be adjusted.

How to lock

• Press the “+”and “-” button to start lock function. The lock indicator lights up.

Now only the “ON/STANDBY” button can be used to switch o the induction cooker,

all the other operations are forbidden.

• Press the “+”and “-” button for 3 seconds to quit the lock function.

The lock indicator turns o.

RUSTA 900101500101 User Manual

Questions and Answers: