7
DE FINOSEENG
Abnormalities Key checking points and trouble shooting
After plugging in the power cord and
pressing the “ON/STANDBY” key, the
indicator and display do not light up.
Is the power plug properly connected?
Is the switch, power outlet, fuse or power
cord damaged?
The “ON/STANDBY” indicator lights up
and the display works normally, but
heating does not start.
Is the pot material proper?
Is the appliance in a “Preset” working status?
For other causes, please take the appliance to a
repairing and maintenance site to be fixed.
Heating suddenly stops during
the process.
Is the temperature of the oil too high when
frying dishes?
Is the temperature of the surroundings very high?
Is the air inlet or air outlet of the induction
cooker blocked?
Is the default heating time of the induction
cooker over?
The self-safety protection of the induction cooker
starts, wait for several minutes and connect power
to use it.
Code of failure. E3 E6
Wait a moment and press the “ON/STANDBY” button
when the temperature of the hotplate becomes
normal, the induction hotplate will operate as usual.
E7 E8
Turn o the hotplate, when the voltage becomes
normal, and then turn on the hotplate, it will operate
as usual.
E1 E2
E4 E5
Eb
Please contact the special maintenance
department.
• For oil spots on the cooker plate, wipe the cooker plate by using a soft moist cloth
with a little tooth paste or milddetergent. And then use a soft moist cloth to wipe
it until no stain remains.
• When not using it for a long time, please disconnect the power plug from the power
outlet and protect the induction cooker from any dust or bugs.
PROBLEM-SOLVING
To Next Page
Loading...
General