6
Switch Off
• When the operating time is over, the induction cooker switches o automatically
• Press the “ON/STANDBY” button to turn o the appliance
NOTE: Do not touch the surface of the ceramic while “H” is displayed, it means
the temperature high. While “L” is displayed, it means the temperature low.
COOKER COMPATIBLE COOKWARE
• Requirement for pot materials: containing magnetic inducting materials.
• Shape requirement: plat bottom, with the diameter more than 15 cm and less
than 20 cm.
• After the first use, some white spots would appear at the bottom of the pot.
This is normal.
• Please pour some vinegar into the pot, heat it at about 60–80°C, then wipe the
spots away with brush.
• Incompatible pots material: glass, ceramic, aluminium, copper and other non
magnetic material.
• If the pot removed, the induction cooker will stop heating immediately. After the buzzer
sounds for 1 minute, it will go into standby mode automatically.
CARE AND CLEANING
• Make sure the air vents are not blocked and keep utensils away from the immediate
Before cleaning, please switch o the appliance first and then disconnect the power
plug from the power outlet. Wait till the cooker plate of the induction cooker is not
hot and start cleaning.
• After using the induction cooker for a long time, the opening of air inlet/air outlet will
pile up with dust or other dirt, please wipe it with a soft dry cloth. Dust in the air inlet
and outlet can be cleaned by using a soft brush or a mini vacuum cleaner.
NOTE: Please do not rinse it with water.
Iron oil frying pan Stainless steel por Iron pan Iron kettle
Enamel stainless
steel kettle
Enamel cooking
utensil
Iron plate
To Next Page
Loading...
General