62
10
11
22
Step 10
Lift the assembled Leg Support to a standing position and secure the Curved Top Rail with Leg Sockets (# 5)
to the Support Tube (#12) with Short Bolt (# A), Large Spring Lock Washer (# C), Arc Washer (# F) Tighten
using Allen Wrench (# I) . Repeat in the same manner for (# 9) of Leg Supports.
Step 11
Slide Curved Top Rail with Leg Sockets (# 3) into Curved Top Rail with Leg Sockets (# 5)
Repeat in the same manner for Leg Sockets (# 8) and (# 9) of Leg Supports.
20
Slide Right Straight Top Frame (# 7) into Left Straight Top Frame (# 6)
0
11
8
9
NOTE! Repeat step 7 to fit
the other whole section.
Step 8
Connect Ground Leg Tube (# 13 and #14) and secure with Short Bolt (# A), Large Spring Lock Washer (# C),
Arc Washer (# F) Tighten using Allen Wrench (# I)
Step 9
Slide Support Tube (#12) into Ground Leg Tube (# 13 and #14) and secure with Short Bolt (# A), Large Spring
Lock Washer (# C), Arc Washer (# F) Tighten using Allen Wrench (# I)
21
Step 8
Connect Ground Leg Tube (# 13 and #14) and secure with Short Bolt (# A), Large Spring Lock Washer (# C),
Arc Washer (# F) Tighten using Allen Wrench (# I)
Step 9
Slide Support Tube (#12) into Ground Leg Tube (# 13 and #14) and secure with Short Bolt (# A), Large Spring
Lock Washer (# C), Arc Washer (# F) Tighten using Allen Wrench (# I)
22
Step 10
Lift the assembled Leg Support to a standing position and secure the Curved Top Rail with Leg Sockets (# 5)
to the Support Tube (#12) with Short Bolt (# A), Large Spring Lock Washer (# C), Arc Washer (# F) Tighten
using Allen Wrench (# I) . Repeat in the same manner for (# 9) of Leg Supports.
Step 11
Slide Curved Top Rail with Leg Sockets (# 3) into Curved Top Rail with Leg Sockets (# 5)
Repeat in the same manner for Leg Sockets (# 8) and (# 9) of Leg Supports.
22
Step 10
Lift the assembled Leg Support to a standing position and secure the Curved Top Rail with Leg Sockets (# 5)
to the Support Tube (#12) with Short Bolt (# A), Large Spring Lock Washer (# C), Arc Washer (# F) Tighten
using Allen Wrench (# I) . Repeat in the same manner for (# 9) of Leg Supports.
Step 11
Slide Curved Top Rail with Leg Sockets (# 3) into Curved Top Rail with Leg Sockets (# 5)
Repeat in the same manner for Leg Sockets (# 8) and (# 9) of Leg Supports.
To Next Page
Loading...
