The picture below shows the display in the operation mode.
The detector has 7 factory pre-set programs designed for various types of objects as
shown in the table below and 4 user programs.
Ultra deep A program to search for very large objects at great depth made of steel and
non-ferrous metals. Classic non-motion mode without Discrimination and with
graphic identification on display.
Deep A program optimised for large steel objects at large depths.
Big silver A program optimised for searching for big silver and copper coins.
Basic A universal program. If you are not sure which program to choose, this is
a good programme to start with.
Coins A program to search for coins.
Fast A fast program to search for coins and other small non-ferrous objects
amongst steel junk.
Ultra fast A very fast program to search for coins and other small non-ferrous objects
amongst steel junk.
Personal 1 – 4 4 programs customisable by the user – this allows you to create your own
programs without having to modify the factory pre-set programs. These are
initially configured with Basic program settings.
NOTE: The factory programs are optimised for ease of use. When beginning to use the detector
we strongly recommend trying the detector with these factory programs without changing
settings in the menu. This will help you to learn quicker how the detector operates.
RUTUS Alter71 ver. 2.0 6
To Next Page
Loading...