Need help?Do you have a question about the Ruud RHPBZR Series and is the answer not in the manual?
Contains critical safety warnings for installation and operation.
Manufacturer's warranty exclusion for unauthorized parts and their risks.
Warnings about disconnecting power and proper grounding.
Warnings about connecting ductwork to heat sources and fiberglass insulation.
Procedure for running the unit before agency testing.
Guidelines for verifying efficiency ratings.
Pre-installation checkpoints and general considerations.
Guidelines for selecting and preparing an outdoor slab location.
Required minimum clearances for proper operation and servicing.
Considerations for mounting the unit on a roof.
Requirements for power supply, disconnects, and wiring.
Detailed steps for connecting power and electric heater kits.
Guidelines for low-voltage control wiring and thermostat compatibility.
Information on internal wiring replacement and adherence to original specifications.
Critical warning and requirement for proper unit grounding.
Explains thermostat control for cooling and heating modes.
Conditions required to initiate a defrost cycle.
How defrost cycles are terminated by time or temperature.
Location and function of coil and ambient temperature sensors.
Procedure for initiating and monitoring manual defrost cycles.
Steps for diagnosing defrost control issues.
How pressure controls protect the system and prevent lockouts.
Diagnostic codes based on LED indicators and control board status.
Table correlating sensor temperature to resistance values.
General| Type | Heat Pump |
|---|---|
| Refrigerant | R-410A |
| Cooling Capacity | 2-5 tons |
| Heating Capacity | 2-5 tons |
| Series | RHPBZR |
| Warranty | 10-Year Limited Warranty |
To Next Page