To Next PageTo Next Page
Need help?Do you have a question about the Ruud RP1436AJ1NA and is the answer not in the manual?
General safety precautions for installation and operation.
Precautions specific to R-410A refrigerant and system operation.
Importance of proper sizing and installation for optimal performance.
List of components that must be matched for system compatibility.
Guidance on selecting the optimal installation location for the unit.
Essential tools and refrigerant information for R-410A systems.
Section covering refrigerant tubing installation and connection practices.
Table for selecting liquid line size based on capacity, elevation, and equivalent length.
Table for selecting suction line size and capacity multiplier.
Procedure for testing the system for leaks after installation.
Instructions for wiring the control circuits, including wire sizing and diagrams.
Guidelines for connecting power wiring to the unit, including voltage ranges.
Importance and method of grounding the unit for safety.
Initial start-up procedures, including crankcase heater operation.
Procedures for checking and calculating system airflow and related formulas.
Steps for evacuating the system and performing final leak testing.
Detailed steps for evacuating the system to remove air and moisture.
Procedures for checking and adjusting the refrigerant charge.
Calculating and adjusting refrigerant charge by weight.
Continued steps for checking and adjusting refrigerant charge.
Using subcooling to fine-tune the refrigerant charge.
Chart listing common symptoms, possible causes, and remedies.
General