USING THE VIAL DRAWER
The vial drawer enables rapid, direct filling of prescription vials.
Remove both collection drawers and insert the vial drawer into upper
drawer slot.
Simply insert the vial onto the dispensing tube. The vial retaining tab will
hold the vial firmly in place. For large vials, insert all the way onto the
dispensing tube. For small vials, insert into the open front of the
dispensing tube.
Use the vial drawer only in Multi or Inventory count modes. DO NOT use
the funnel drawer in Single mode.
If the vial drawer was used in Single count mode, press STOP before
removing the drawer. To clear the turntable disc, replace top drawer,
press CLEAR / INVENTORY / START.
To Next Page
Loading...