Why won't my Ryobi 410R Tiller start?
Your Ryobi Tiller might not start due to several reasons. First, ensure the ignition switch is in the "ON" position. Another reason could be an empty fuel tank, so fill it up. Also, make sure you fully depress the primer bulb five times slowly. Lastly, the engine might be flooded; in that case, use the starting procedure without using the choke.
Engine Specifications| engine type | Air-Cooled, 2-Cycle |
|---|---|
| displacement | 31 cc (1.9 cu. in) |
| bore | 1.37 in (34.79 mm) |
| stroke | 1.25 in (31.75 mm) |
| compression average | 120-90 Ibs (55-41 kg) |
| operating rpm | 7000 rpm |
Fuel System| fuel tank capacity | 18 oz (530 ml) |
|---|---|
| fuel/oil ratio | 32:1 |
| fuel tank material | HD Polyethylene |
Torque Specifications| flywheel torque | 150 Ibf.in (17.25 g/cm) |
|---|---|
| cylinder bolts torque | 120 Ibf·in (13.8 g/cm) |
| muffler bolts torque | 67 Ibf·in (7.6 g/cm) |
Weight and Dimensions| operating weight | 22.5 Ibs (11.2 kg) |
|---|
To Next Page
