To Next PageTo Next PageWhy Ryobi RY46501A Tiller motor fails to start when switch trigger is depressed?
If the Ryobi Tiller motor doesn't start when you press the switch trigger, it might be due to the power cord not being properly plugged in or a loose connection. Ensure the power cord is securely plugged in and check the circuit breaker.
What to do if Ryobi Tiller motor runs but tines do not move?
If the motor of your Ryobi Tiller is running but the tines aren't moving, this indicates a gear train failure. In this case, take the unit to an authorized service center.
General| Engine Type | 4-Cycle |
|---|---|
| Number of Tines | 4 |
| Starting System | Recoil |
| Forward Rotating Tines | Yes |
| Warranty | 3 Years |
| Tilling Width | 16 inches |
| Tilling Depth | 8 inches |
Critical safety precautions to follow before connecting to power or modifying the tool.
Instructions for correctly orienting and securing the inner and outer tines onto the tine shaft.
Instructions on how to safely start and stop the cultivator using the switch trigger and lock-out.
Essential safety warnings regarding familiarity, eye protection, attachments, and moving parts.
Guidance on breaking up soil and preparing a seedbed, including drag bar and wheel adjustments.
Techniques for shallow cultivating, weed disruption, and modifying cultivating width.
How to adjust the wheel height for transport or general cultivating.
