The RYOBI CHV182 is an 18V Hand Vacuum designed for light-duty vacuuming of dry surfaces. This owner's operating manual provides essential information for mounting, operating, and maintaining the device, emphasizing safety and proper usage.
Function Description:
The RYOBI CHV182 is a cordless hand vacuum powered by an 18V battery pack, suitable for quick clean-ups around the home or workshop. Its primary function is to collect dry dust and debris from various surfaces. The vacuum features an ON-OFF switch for easy operation and a crevice/brush attachment for versatile cleaning. The dust bowl and filter are designed for easy removal and cleaning, ensuring efficient performance. The device is intended for household use only and should not be used for vacuuming hot coals, cigarette butts, matches, or other hazardous materials. It is also not designed to pick up hard objects like nails, screws, or coins, as this could cause damage or injury.
Important Technical Specifications:
- Voltage: 18 V
- Air flow volume: 0.83 m³/min
- Dust storage capacity: 650 ml
- Weight: 0.91 kg
- Compatible Battery Packs (not included): BPL-1820, BPL-1815, ABP1801, ABP1802, ABP-1813, ABP-1815
- Compatible Chargers (not included): BCL-1800, BCS618, BCL1418, ACR1800, 260022029
The vacuum is designed to work with both Lithium-ion and Nickel-cadmium 18V battery packs. Ryobi 18V Lithium-ion batteries include built-in features to protect the cells and maximize battery life. These features may cause the battery and tool to stop running under certain operating conditions. To reset, the user should release the trigger and resume normal operation. If this does not reset the battery, it indicates the battery pack is depleted and needs charging.
Usage Features:
- Battery Installation and Removal: To install a battery pack, ensure the slide switch is in the off position, then insert the battery pack into the product until the latches snap into place. To remove, depress the latches on both sides of the battery pack and pull it out.
- Starting and Stopping: The vacuum is started by sliding the ON-OFF switch towards the front of the vacuum and stopped by sliding it towards the back.
- Crevice/Brush Attachment: The CHV182 includes a combination crevice/brush attachment conveniently stored on the underside of the dust bowl. To detach, pull it forward and remove it. The attachment's cover slides forward to convert it from a brush to a crevice tool, allowing for versatile cleaning in tight spaces or on delicate surfaces. To attach, turn off the vacuum, remove the battery pack, and insert the attachment into the front end of the dust bowl, ensuring it is firmly pushed into place.
- Dust Bowl and Filter: The dust bowl is designed for easy removal to facilitate emptying and cleaning. To remove the dust bowl, first remove the battery pack, then depress the release button on top of the hand vacuum and pull the dust bowl down and out from the motor housing. The filter inside the dust bowl can be removed by pressing its tabs inward and lifting it out of the screen assembly.
- Safety Precautions: Users are advised to always wear safety goggles or glasses with side shields during operation, especially when blowing dust. If the operation is dusty, a dust mask should also be worn. The vacuum should only be used indoors and should not be exposed to wet conditions or operated with wet hands. It is crucial to remove the battery pack when the vacuum is not in use, before servicing, or when changing accessories to prevent accidental starting. The hand vacuum and batteries should not be placed near fire or heat, as they may explode. The vacuum should be charged in a location where the temperature is between 10°C and 38°C.
Maintenance Features:
- Cleaning the Hand Vacuum: The dust bowl should be checked, emptied, and cleaned periodically to maintain maximum dust collection efficiency. After removing the dust bowl, the filter can be shaken or lightly brushed to remove dust or dirt. The screen and screen assembly can also be shaken or lightly brushed, and washed if necessary. Before reattaching to the hand vacuum, all parts must be completely dry.
- Filter Replacement: When a replacement filter is needed, the recommended part number is 019484002004.
- Reattaching the Dust Bowl: To reattach the dust bowl, align the slot on the bottom of the dust bowl with the tab on the bottom of the motor housing, then snap the two sections together.
- General Maintenance: Avoid using solvents when cleaning plastic parts, as most plastics are susceptible to damage from commercial solvents. Instead, use clean cloths to remove dirt, dust, oil, and grease. It is critical to prevent brake fluids, gasoline, petroleum-based products, and penetrating oils from coming into contact with plastic parts, as these chemicals can cause damage and serious personal injury.
- Service and Repair: Only identical replacement parts should be used for servicing to prevent hazards or product damage. Any damaged guards or parts should be properly repaired or replaced by an authorized service center. The battery itself should not be opened due to the risk of short circuit. Only parts listed in the manual are intended for customer repair or replacement; all other repairs should be handled by an Authorized Service Center.
- Charger Safety: The charger should not be exposed to wet or damp conditions. Only attachments recommended by the manufacturer should be used with the charger. When disconnecting the charger, pull the plug, not the cord, to avoid damage. Ensure the cord is positioned to prevent stepping on, tripping over, or other damage. Extension cords should only be used if absolutely necessary and must be properly wired and in good electrical condition, with pins matching the charger plug. If the charger is damaged, it should be replaced by a qualified serviceman. Do not disassemble the charger. Unplug the charger from the outlet before any maintenance or cleaning.
The manual emphasizes the importance of reading all safety warnings and instructions to prevent electric shock, fire, and serious injury. It also highlights the need to store idle power tools out of reach of children and untrained users. The RYOBI CHV182 is designed for convenience and efficiency in light cleaning tasks, with clear guidelines for safe and effective operation and maintenance.
Need help?
General
To Next Page
