Page 12
■ CUTTING LARGER WORKPIECES WITH
SLIDE ACTION
When cutting large workpieces with the slide action,
the workpiece is placed squarely against the rear
fence and is firmly locked in the vice.
Grasp the saw handle firmly, press down the lock-off
switch and depress the trigger switch. (Fig 25)
Slide the cutting head away from the rear fence to
the outermost position. (Fig 26)
Slowly lower the blade into and through the
workpiece and push the blade through the timber
towards the rear fence. (Fig 27)
WARNING:
Never place undue force
on the saw handle in a
right or left direction as
this will misalign the head
and result in an inaccurate cut.
Fig 25
Fig 26
Fig 27
To Next Page
Loading...
