■ CUTTING COMPOUND MITRES
To aid in making the correct settings, the compound angle setting chart below has been provided.
Since compound cuts are the most difficult to accurately obtain, trial cuts should be made in scrap material,
and much thought and planning made, prior to making your required cut.
Page 13
45678 910
M-45.00
0
M-36.00
0
M-30.00
0
M-25.71
0
M-22.50
0
M-20.00
0
M-18.00
0
B- 0.00
0
B- 0.00
0
B- 0.00
0
B- 0.00
0
B- 0.00
0
B- 0.00
0
B- 0.00
0
M-44.89
0
M-35.90
0
M-29.91
0
M-25.63
0
M-22.42
0
M-19.93
0
M-17.94
0
B- 3.53
0
B- 2.94
0
B- 2.50
0
B- 2.17
0
B- 1.91
0
B- 1.71
0
B- 1.54
0
M-44.56
0
M-35.58
0
M-29.62
0
M-25.37
0
M-22.19
0
M-19.72
0
M-17.74
0
B- 7.05
0
B- 5.86
0
B- 4.98
0
B- 4.32
0
B- 3.81
0
B- 3.40
0
B- 3.08
0
M-44.01
0
M-35.06
0
M-29.15
0
M-24.95
0
M-21.81
0
M-19.37
0
M-17.42
0
B- 10.55
0
B- 8.75
0
B- 7.44
0
B- 6.45
0
B- 5.68
0
B- 5.08
0
B- 4.59
0
M-43.22
0
M-34.32
0
M-28.48
0
M-24.35
0
M-21.27
0
M-18.88
0
M-16.98
0
B- 14.00
0
B- 11.60
0
B- 9.85
0
B- 8.53
0
B- 7.52
0
B- 6.72
0
B- 6.07
0
M-42.19
0
M-33.36
0
M-27.62
0
M-23.56
0
M-20.58
0
M-18.26
0
M-16.41
0
B- 17.39
0
B- 14.38
0
B- 12.20
0
B- 10.57
0
B- 9.31
0
B- 8.31
0
B- 7.50
0
M-40.89
0
M-32.18
0
M-26.57
0
M-22.64
0
M-19.73
0
M-17.50
0
M-15.72
0
B- 20.70
0
B- 17.09
0
B- 14.48
0
B- 12.53
0
B- 11.03
0
B- 9.85
0
B- 8.89
0
M-39.32
0
M-30.76
0
M-25.31
0
M-21.53
0
M-18.74
0
M-16.60
0
M-14.90
0
B- 23.93
0
B- 19.70
0
B- 16.67
0
B- 14.41
0
B- 12.68
0
B- 11.31
0
B- 10.21
0
M-37.45
0
M-29.10
0
M-23.86
0
M-20.25
0
M-17.60
0
M-15.58
0
M-13.98
0
B- 27.03
0
B- 22.20
0
B- 18.75
0
B- 16.19
0
B- 14.24
0
B- 12.70
0
B- 11.46
0
M-35.26
0
M-27.19
0
M-22.21
0
M-18.80
0
M-16.32
0
M-14.43
0
M-12.94
0
B- 30.00
0
B- 24.56
0
B- 20.70
0
B- 17.87
0
B- 15.70
0
B- 14.00
0
B- 12.62
0
M-32.73
0
M-25.03
0
M-20.36
0
M-17.20
0
M-14.91
0
M-13.17
0
M-11.80
0
B- 32.80
0
B- 26.76
0
B- 22.52
0
B- 19.41
0
B- 17.05
0
B- 15.19
0
B- 13.69
0
M-29.84
0
M-22.62
0
M-18.32
0
M-15.44
0
M-13.36
0
M-11.79
0
M-10.56
0
B- 35.40
0
B- 28.78
0
B- 24.18
0
B- 20.82
0
B- 18.27
0
B- 16.27
0
B- 14.66
0
M-26.57
0
M-19.96
0
M-16.10
0
M-13.54
0
M-11.70
0
M-10.31
0
M- 9.23
0
B- 37.76
0
B- 30.60
0
B- 25.66
0
B- 22.07
0
B- 19.35
0
B- 17.23
0
B- 15.52
0
M-22.91
0
M-17.07
0
M-13.71
0
M-11.50
0
M- 9.93
0
M- 8.74
0
M- 7.82
0
B- 39.86
0
B- 32.19
0
B- 26.95
0
B- 23.16
0
B- 20.29
0
B-18.06
0
B-16.26
0
M-18.88
0
M-13.95
0
M-11.17
0
M- 9.35
0
M- 8.06
0
M- 7.10
0
M- 6.34
0
B- 41.64
0
B- 33.53
0
B- 28.02
0
B- 24.06
0
B- 21.08
0
B- 18.75
0
B- 16.88
0
M-14.51
0
M-10.65
0
M- 8.50
0
M- 7.10
0
M- 6.12
0
M- 5.38
0
M- 4.81
0
B- 43.08
0
B- 34.59
0
B- 28.88
0
B- 24.78
0
B- 21.69
0
B- 19.29
0
B- 17.37
0
M- 9.85
0
M- 7.19
0
M- 5.73
0
M- 4.78
0
M- 4.11
0
M- 3.62
0
M- 3.23
0
B- 44.14
0
B- 35.37
0
B- 29.50
0
B- 25.30
0
B- 22.14
0
B- 19.68
0
B- 17.72
0
M- 4.98
0
M- 3.62
0
M- 2.88
0
M- 2.40
0
M- 2.07
0
M- 1.82
0
M- 1.62
0
B- 44.78
0
B- 35.84
0
B- 29.87
0
B- 25.61
0
B- 22.40
0
B- 19.92
0
B- 17.93
0
M- 0.00
0
M- 0.00
0
M- 0.00
0
M- 0.00
0
M- 0.00
0
M- 0.00
0
M- 0.00
0
B- 45.00
0
B- 36.00
0
B- 30.00
0
B- 25.71
0
B- 22.50
0
B- 20.00
0
B- 18.00
0
65
0
70
0
75
0
80
0
85
0
90
0
60
0
55
0
50
0
20
0
0
0
PITCH
OF SIDE
5
0
10
0
15
0
25
0
30
0
35
0
40
0
45
0
NUMBER OF SIDES
Each B (Bevel) and M (mitre) Setting is given to the closest 0.005
0
.
COMPOUND ANGLE SETTINGS FOR POPULAR STRUCTURES.
To Next Page
Loading...
