13
RYOBI 3/8 in. DRILL-DRIVER – MODEL NO. D45C
The model number will be found on a plate attached to the motor housing. Always mention the
model number in all correspondence regarding your RYOBI 3/8 in. DRILL-DRIVER or when order-
ing parts.
SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS
PARTS LIST
Key No. Part No. Description Quan.
1 982672-001 Data Plate..................................................................................... 1
2 982673-001 Logo Plate .................................................................................... 1
3 982674-001 3/8 in. Chuck................................................................................. 1
972000-875 Operator’s Manual
NOTE: "A"–
The assembly shown represents an important part of the Double Insulated System. To avoid
the possibility of alteration or damage to the system, service should be performed by your nearest
authorized service center.
SEE NOTE "A"
20
24
5
1
2
3
0
-
1
0
0
-
3
/
8
To Next Page
Loading...
Need help?
General
