11
OPERATION
ACCESSORY CHART
Quantity Accessory Application
6 Orange 120-Grit Aluminum Oxide Grinding Wheel Bits
Ferrous materials: casting, welds, rivets,
rust
4 Green 120-Grit Silicon Carbide Grinding Wheel Bits
Non-ferrous materials: stone, ceramics,
porcelain, glass
3
3/4 in. Wire Circle Brushes (nylon, brass, stainless
steel)
Nylon brush: removing dirt and dust
Brass and steel brush: removing rust
4
Wire Cup Brushes ( 3/16 in. nylon, 3/16 in. and 5/8 in.
brass, 5/8 in. stainless steel)
Nylon brush: removing dirt and dust
Brass and steel brush: removing rust
1 1/4 in. Drum Sander Mandrel Attaching sanding drums
1 1/2 in. Drum Sander Mandrel Attaching sanding drums
4 Green Rubber Polishing Bits
Ferrous materials: removing small burrs
and scratch marks
36 15/16 in. X 1/64 in. Cut-off Discs Cutting ferrous materials
1 Polishing Compound Vial Polishing
72 15/16 in. X 1/32 in. Cut-off Discs Cutting ferrous materials
6 3/4 in. Pink 220-Grit Aluminum Oxide Grinding Wheels
Ferrous materials: casting, welds, rivets,
rust
4 1/2 in. Felt Polishing Wheels
Buffing to a bright finish with polishing
compound
1 7/8 in. X 5/32 in. Rubber Emery Wheel
Buffing to a bright finish with polishing
compound
17 1/4 in. X 1/2 in. Sanding Drums (60-Grit and 120-Grit) Sanding
17 1/2 in. X 1/2 in. Sanding Drums (60-Grit and 120-Grit) Sanding
6
3/4 in. Green 180-Grit Aluminum Oxide Grinding
Wheels
Ferrous materials: removing small burrs
and scratch marks
1 Silicon Carbide Dressing Stone
Bringing shape back to parabolic shaped
grinding attachments
1 Cloth Polishing Wheels Polishing and buffing
1 Diamond Cut-off Wheel
Cutting marble, concrete, brick, porcelain,
ceramic, epoxy, and hard woods
1 1 in. Felt Polishing Wheel Polishing and buffing
1 Felt Polishing Drum Polishing and buffing
5 1-1/4 in. Fiberglass Cut-off Wheels Cutting ferrous materials
1 1/8 in. Screw Mandrel Attaching felt attachments
3
Mandrels (1/8 in. shank X 1/16 in. and 1/8 in. shank X
3/32 in.)
Attaching cut-off discs, cut-off wheels,
grinding wheels, and emery wheel
1 1-1/4 in. X 3/8 in. 80-Grit Sanding Flap Wheel Removing rust and mold
14 High Speed Steel Drill Bits (1/16 in., 3/32 in., 1/8 in.) Drilling
5 Diamond Wheel Points
Cutting, engraving, carving, and fine
detailing work
Wood, jade, ceramic, glass, hardened
steel, and semi-precious stones
1 1/8 in. Drywall Cutting Bit Cutting drywall
To Next Page
Loading...
