Ryobi MIG-180 - Specifications

OWNER’S OPERATING MANUAL
MIG/MMA INVERTER WELDER
MODEL MIG-180
KEEP THIS MANUAL FOR FUTURE REFERENCE
Your new inverter generator has been engineered and manufactured to Ryobi’s
high standard of dependability, ease of operation and operator safety. Properly
cared for, it will give you years of rugged, trouble free performance. If you use
your inverter generator properly and only for what it is intended, you will enjoy
years of safe, reliable service.
SPECIFICATIONS
Rated input power supply......................................................AC 230V±5% 50/60Hz
Rated input capacity......................................................................................6.9KVA
Current adjustment range (MIG)................................................................. 30-180A
Current adjustment range (MMA)................................................................10-160A
Rated duty cycle................................................................................................ 60%
Rated output voltage........................................ 15.5-23V (MIG), 20.4-26.4V (MMA)
No load voltage.................................................................................................. 52V
Overall efficiency................................................................................................80%
Housing protection grade................................................................................IP21S
Power factor..............................................................................................0.63 cosφ
Insulation grade...................................................................................................... F
Electrode diameter......................................... 0.6-1.0mm (MIG), 1.6-4.0mm (MMA)
Noise......................................................................................................... <70dB(A)
Dimensions............................................................................... 502 x 225 x 375mm
Weight............................................................................................................ 12.8kg
THANK YOU FOR BUYING A RYOBI
MIG/MMA INVERTER WELDER
CAUTION: Carefully read through this entire owner’s
manual, paying close attention to the general
safety rules and rules for safe operation,
before using.
1