5 — English
CHARGING A HOT BATTERY PACK
When using a tool continuously, the battery pack may become
hot. A hot battery pack may be placed directly onto the 40V
tool’s battery port but charging will not begin until the battery
temperature cools to within acceptable temperature range.
When a hot battery pack is placed on the charger, the orange
LED will be on and the green LED will be off. When the battery
pack cools, the charger will automatically begin charging.
OPERATION
CHARGING A COLD BATTERY PACK
A cold battery pack may be placed directly onto the 40V
tool’s battery port but charging will not begin until the battery
temperature warms to within acceptable temperature range.
When a cold battery pack is placed on the charger, the orange
LED will be on and the green LED will be off. When the battery
pack warms the charger will automatically begin charging.
LED FUNCTIONS
See Figures 1 and 4, page 7.
This product has a three-year limited warranty for personal, family, or household use. One-
year if used for any other purpose, including without limitation commercial or rental use.
For Warranty details go to www.ryobitools.com
NOTE: MAINTENANCE INFORMATION BEGINS ON PAGE 6
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.
ILLUSTRATIONS START ON PAGE 7.
BATTERY
PACK
RED
LED
GREEN
LED
ACTION
Battery In
Waiting ON OFF Battery is standing by awaiting its turn to charge.
Testing
Hot battery pack
ON ON
When battery pack reaches cooled temperature, backpack begins charge mode.
Cold battery pack When battery pack reaches warmed temperature, backpack begins charge mode.
Error
Error Flashing Flashing Battery pack or backpack error.
• Try to repeat the conditions a second time by removing and reinstalling the battery pack. If the LED status repeats a second time, try
charging a different battery.
• If a different battery charges normally, dispose of the pack that received the Error (see your battery pack manual for instructions).
• If a different battery also indicates Error, the
backpack
should be replaced.
Charging
Fast charging OFF Flashing Battery is being charged.
Ready
Battery full OFF ON Charging is complete. LED will turn off 10 minutes after charging has been completed.
To Next Page
Loading...
