Ryobi OWS1815 - Product Specifications; Vibration Level; Battery and Charger; Replacement Parts

PRODUCT SPECIFICATIONS
Model OWS1815
Pump type Diaphragm pump
Spray valve Integral grip lever
Tank capacity 15 L
Dimension (WxLxH) 340 x 360 x 540 mm
Gross mass (empty) 6.35 kg (without battery)
Gross mass (full) 22 kg
Rated voltage 18 V DC
Operating temperature (max) 40°C
Flow rate
Flat fan nozzle
Fan 1400 mL/min at 58 psi
Cone spray nozzle
Stream 1300 mL/min at 61 psi
Scatter 1000 mL/min at 84 psi
Working pressure (maximum) 90 psi (static pressure)
Residual solution in tank (max) 250 mL
Size of ller strainer mesh 1.3 mm
A-weighted emission sound pressure
level at the operator’s position
70 dB (A)
Vibration values determined according to EN 60745-1
Main handle 1.87 m/s
2
Uncertainty 1.5 m/s
2
BATTERY AND CHARGER
Model OWS1815
Compatible
battery packs
RB18L13, RB18L15, RB18L20, RB18L25,
RB18L40, RB18L50
Compatible
chargers
BCS618G, BCL14181H, BCL14183H,
BCL14181V, RC18150U, RC18627U,
RC18120, RC18115
REPLACEMENT PARTS
Nozzle and Wand Assembly 313969001
Handle and Hose Assembly 564605002
Basket Filter 313531001
Pick-up Tube 314681001
NOTE: Visit your local special orders desk or contact
RYOBI Customer Service for replacement parts.
VIBRATION LEVEL
WARNING
The declared vibration value has been measured with a
standard test method and may be used to compare one
tool with another.
The declared vibration value may be used in a
preliminary assessment of exposure.
The vibration emission during actual use of power tool
can differ from the declared total value depending on the
ways in which the tool is used.
Identify safety measures to protect yourself based on an
estimation of exposure in the actual conditions of use,
taking account of all parts of the operating cycle such
as the times when the tool is switched off and when it is
running idle in addition to the trigger time.