Ryobi P225 - User Manual

To Next Page

OPERATOR’S MANUAL

MANUEL D’UTILISATION

MANUAL DEL OPERADOR

18 V DRYWALL SCREWDRIVER

VISSEUSE POUR PLACOPLÂTRE DE 18 V

DESTORNILLADOR PARA PANELES DE

YESO DE 18 V

P225

WARNING: To reduce the risk

of injury, the user must read and un-

derstand the operator’s manual before

using this product.

SAVE THIS MANUAL FOR

FUTURE REFERENCE

ADVERTENCIA: Para

reducir el riesgo de lesiones, el usuario

debe leer y comprender el manual del

operador antes de usar este producto.

AVERTISSEMENT :

Pour

réduire les risques de blessures,

l’utilisateur doit lire et veiller à bien

comprendre le manuel d’utilisation avant

d’employer ce produit.

GUARDE ESTE MANUAL

PARA FUTURAS CONSULTAS

CONSERVER CE MANUEL

POUR FUTURE RÉFÉRENCE

TABLE OF CONTENTS

****************

 General Power Tool Safety Warnings

........................................................2-3

 Screwdriver Safety Warnings .............4

Symbols ..............................................5

 Assembly ............................................ 6

 Operation .........................................6-7

 Maintenance ....................................... 8

 Illustrations .........................................9

 Parts Ordering and Service

............................................Back page

TABLE DES MATIÈRES

****************

 Avertissements de sécurité générales

relatives aux outils électriques ........2-3

 Avertissements de sécurité relatifs

tournevis ............................................4

Symboles ............................................5

 Assemblage ........................................6

 Utilisation ........................................6-7

 Entretien .............................................8

 Illustrations .........................................9

 Commande de pièces et dépannage

..........................................Page arrière

ÍNDICE DE CONTENIDO

****************

 Advertencias de seguridad para

herramientas eléctrica .................... 2-3

 Advertencias de seguridad

destornillador .....................................4

Símbolos ............................................5

 Armado ..............................................6

 Funcionamiento ............................. 6-7

 Mantenimiento ...................................8

 Illustraciones ......................................9

 Pedidos de piezas y servicio

......................................Pág. posterior

Main Page

Need help?

Do you have a question about the Ryobi P225 and is the answer not in the manual?

The RYOBI P225 is an 18V Drywall Screwdriver designed for driving screws into drywall. It is a cordless power tool, operating on lithium-ion (Li-Ion) batteries, and is part of the RYOBI ONE+ system, indicating compatibility with a range of 18V batteries and chargers from the same brand.

Function Description:

The primary function of this tool is to efficiently drive screws into drywall. It features a variable speed switch, allowing the operator to control both the speed and torque limits for precise application. A lock-on switch is included for continuous driving during extended periods, enhancing user comfort and reducing fatigue. A notable feature is the QUIETDRIVE mode, which optimizes motor engagement. In this mode, the motor only activates when the trigger is locked on and pressure is applied to the bit, contributing to quieter operation and potentially longer battery life by only drawing power when actively driving a screw. The tool also incorporates an adjustable nosepiece for setting preset screw depths, ensuring consistent and flush screw placement. The direction of rotation can be easily changed using a lever, allowing for both forward driving and reverse removal of screws. An integrated LED light illuminates the work area, improving visibility in dimly lit conditions.

Important Technical Specifications:

While specific numerical specifications like RPM or torque are not explicitly listed in the provided pages, the manual highlights several key operational aspects:

Power Source: 18V Lithium-ion battery (cordless).
Speed Control: Variable speed switch for operator control of speed and torque.
Depth Control: Adjustable nosepiece for preset screw depths.
Direction Control: Forward/reverse rotation lever.
Lighting: LED light on the front of the tool base.
Compatibility: Uses batteries and chargers listed in correlation supplement 987000-432.
Warranty: 3-year limited warranty.

Usage Features:

Ergonomics: The screwdriver's handle can be gripped in two ways, depending on operator comfort and working angle.
Belt Hook: A belt hook can be installed on either side of the tool for convenient carrying and access.
Bit Installation/Removal: Bits are installed by pulling the sleeve and adjustable nosepiece from the gear casing, pushing the bit holder into the spindle until it clicks, inserting the bit, and then reattaching the sleeve and nosepiece. Removal follows a similar process in reverse.
Battery Pack: The battery pack is inserted until latches snap into place and is removed by depressing the latches.
Starting/Stopping: Depress the switch trigger to turn ON, release to turn OFF.
Lock-on Switch: To activate, depress the trigger, push up and hold the lock-on button, then release the trigger. To release, depress and release the trigger.
QUIETDRIVE Mode: Activated by pressing the QUIETDRIVE button. The LED indicator confirms activation. The motor engages only when pressure is applied to the bit, driving the screw and shutting off when finished. The LED indicator remains on for 60 seconds if the trigger is not locked on, or for 4 hours if locked on, after which the tool enters sleep mode.
Depth Adjustment: Rotate the adjusting sleeve to achieve the desired depth, testing with scrap material as needed.
Driving Screws: Ensure the screwdriver is in the locked-off position, check the direction of rotation, secure the workpiece, install the battery pack, and then depress the trigger. Apply quick, snap-action pressure to engage the clutch and drive the screw. The bit holder is magnetized to hold drywall screws.

Maintenance Features:

General Maintenance: Keep the tool and accessories clean and sharp. Check for misalignment, binding, or breakage of parts.
Cleaning: Avoid using solvents on plastic parts, as they can cause damage. Use clean cloths to remove dirt, dust, oil, and grease.
Service: All servicing should be performed by qualified repair personnel using identical replacement parts to maintain safety. Damaged battery packs should only be serviced by the manufacturer or authorized service provider.
Storage: Store idle power tools out of reach of children and untrained users. Remove the battery pack and turn off QUIETDRIVE mode before storing or transporting.
Battery Care: Recharge only with the manufacturer-specified charger. Use only specifically designated battery packs. Keep battery packs away from other metal objects to prevent shorting. Avoid exposing battery packs or tools to fire or excessive temperatures (above 265°F/130°C). Follow all charging instructions and temperature ranges. In case of battery leakage, flush skin with soap and water, and eyes with clean water for at least 10 minutes, seeking medical attention if necessary. Do not use damaged or modified battery packs or tools.