Ryobi P2302 - Features

5 — English
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper inter-
pretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
Ricochet
Thrown objects can ricochet and result in personal injury or property
damage.
Thrown Objects Thrown objects hazard; keep all bystanders at least 50 ft. (15 m) away.
Blade Rotation Direction of Blade Rotation
Recycle Symbol
This product uses lithium-ion (Li-ion) batteries. Local, state, or federal
laws may prohibit disposal of batteries in ordinary trash. Consult your
local waste authority for information regarding available recycling and/
or disposal options.
Direct Current Type or a characteristic of current
n
o
No Load Speed Rotational speed, at no load
.../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
V Volts Voltage
Hz Hertz Frequency (cycles per second)
min Minutes Time
FEATURES
KNOW YOUR PRODUCT
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
DEPTH ADJUSTMENT LEVER
The depth adjustment lever allows user to control
depth of cut.
EDGER WHEEL
The edger wheel allows for more stable cutting performance
while edging.
LOCK-OUT
The lock-out prevents accidental starting.
BLADE LOCK BUTTON
The blade lock button prevents the blade from rotating when
loosening or tightening the blade bolt.
PRODUCT SPECIFICATIONS
Motor .....................................................................................................................................................................18 Volts DC
Blade Length .....................................................................................................................................................................8 in.
Edging Depth.....................................................................................................................Adjustable from 1/2 in. to 2-1/4 in.